Copper, Oxygen Free High Conductivity C10200 - Plated Wire, Beryllium Copper Wire, Phosphor Bronze Wire, Copper Beryllium Wire
Beryllium Copper Wire, Plated Wire, Phosphor Bronze Wire
COPPER, C10200, Oxygen Free
|
COMPOSITION |
|
| ELEMENT | MINIMUM |
| Copper | 99.95% (Includes Silver) |
| Deoxidents | --- |
|
PHYSICAL PROPERTIES |
||
|
ENGLISH UNITS |
METRIC UNITS |
|
|
Melting Range |
1981°F |
1083°C |
|
Density |
.323 lb/cu in. @ 68°F |
8.94 gm/cm@ 20°C |
|
Specific Gravity |
8.94 |
8.94 |
|
Coefficient of Thermal Expansion |
.0000094 per °F (68-572°F) |
.0000170 per °C (20-300°C) |
|
Thermal Conductivity |
226 BTU/sq ft/ft/hr/°F @ 68°F |
.934 cal/sq cm/cm/sec/°C @ 20°C |
|
Electrical Resistivity |
10.3 Ohms-circ mil/ft @ 68°F |
1.71 microhm - cm @ 20°C |
|
Electrical Conductivity |
OFHC 101% Copper IACS @ 68°F |
.586 megohm cm @ 20°C |
|
Specific Heat |
.092 BTU/lb/°F @ 68°F |
.092 cal/gm/°C @ 20°C |
|
Modulus of Elasticity (tension) |
17,000 KSI |
12,100 kg/sq mm |
|
Modulus of Rigidity (torsion) |
6400 KSI |
4500 kg/sq mm |
|
Annealing Temperature |
700-1200°F |
375-650°C |
|
MECHANICAL PROPERTIES |
||
| For Round Wire | ||
| TEMPER | TENSILE STRENGTH | |
| KSI* | MPa** | |
| Soft or Annealed (.0403) | 35,800 psi max | -- |
| Medium Drawn (.0403) | 53-60 | 365-413 |
| Hard Drawn (.0403) | 67 nominal | 461 nominal |
|
For more details see ASTM B3-63, ASTM B2-52, ASTM B1-56 |
||
|
MECHANICAL PROPERTIES |
|||||
| For Rolled Flat, Square and Rectangular Wire | |||||
| DESIGNATION | SIZE (Thickness) |
TENSILE STRENGTH | % ELONGATION IN 1 in. MIN GAUGE LENGTH |
||
| STD | FORMER | KSI* | MPa* | ||
| 061 | Soft | up to .010 over .010 to .020 over .020 to .050 over .050 to .188 |
-- 40 max 38 max 37 max |
-- 275 max 262 max 255 max |
20 min 25 min 25 min 25 min |
| H04 |
Hard |
up to .020 .020 to .125 |
43-58 43 min |
296-399 296 min |
-- 10 min |
|
For more details see ASTM B3-272-66a |
|||||
|
MECHANICAL PROPERTIES |
|||
| For Rolled Strip | |||
| DESIGNATION | TENSILE STRENGTH | ||
| STD | FORMER | KSI* | MPa* |
| -- | Annealed Soft | Grain Size .050 min Normal | -- |
| -- | Deep Draw | Grain Size .050 min Normal | -- |
| -- | Light Rolled | 32-40 | 220-275 |
| -- | Half Hard (1/2H) | 37-46 | 255-317 |
| H04 | Hard (H) | 43-52 | 296-358 |
| H08 | Spring | 50-58 | 344-399 |
| H10 | Extra Spring | 52 min | 358 min |
|
For more details see ASTM B152 Strip, ASTM 248 General Tolerances |
|||
* 1 KSI equals 1,000 PSI
** 1 KSI equals 6.894,757 MPa
†† Tensile Strength and Grain Size determining factors.
In USA: Tel: (973) 278-1666 |
In The UK: Dorset England DT10 2RZ |
In California Fax 562-968-2110 |