Zirconium Copper C15000, Amzirc - Plated Wire, Beryllium Copper Wire, Phosphor Bronze Wire, Copper Beryllium Wire

Beryllium Copper Wire, Plated Wire, Phosphor Bronze Wire

Plated Wire, Beryllium Copper Wire, Phosphor Bronze Wire

Nickel Wire, Flat Wire, Square Wire, Zirconium Chromium Wire, Brass Wire

Home Contact Request a Quote

You are here: Copper Wire » Zirconium Copper C15000, Amzirc

Zirconium Copper C15000, Amzirc

ZIRCONIUM COPPER, C15000, AMZIRC

COMPOSITION ZIRCONIUM COPPER, C15000, Amzirc
ELEMENT	PERCENT
ELEMENT	MINIMUM	MAXIMUM
Copper & Silver	99.8%	--
Zirconium	.10	.20

PHYSICAL PROPERTIES ZIRCONIUM COPPER, C15000, Amzirc
	ENGLISH UNITS	METRIC UNITS
Melting Range	1795-1975°F	980-1080°C
Density	.321 lb/cu in. @ 68°F	8.89 gm/cm@ 20°C
Specific Gravity	8.89	8.89
Coefficient of Thermal Expansion	.000094 per °F (68-572°F)	.000017 per °C (20-300°C)
Thermal Conductivity	212 BTU/sq ft/ft/hr/°F @ 68°F	.876 cal/sq cm/cm/sec/°C @ 20°C
Electrical Resistivity (Aged)	11.2 Ohms circ mil per ft @ 68°F	1.86 microhm - cm @ 20°C
Electrical Conductivity (Aged)†	93% Copper IACS @ 68°F	.538 megohm cm @ 20°C
Specific Heat	.092 BTU/lb/°F @ 68°F	.092 cal/gm/°C @ 20°C
Modulus of Elasticity (tension)	18,700 KSI	13,000 kg/sq mm
Modulus of Rigidity (torsion)	7300 KSI	5000 kg/sq mm
Annealing Temperature ††	1600-1700°F	870-970°C
Aging Temperature Annealed Hard	930-1020°F (1-4 hr.) 700-890°F (1-4 hr.)	500-550°C (1-4 hr.) 370-475°C (1-4 hr.)

MECHANICAL PROPERTIES ZIRCONIUM COPPER, C15000, Amzirc
For Round and Square Wire, after aging at 750°F (400°C) for one hour
DESIGNATION	TENSILE STRENGTH		YIELD STRENGTH 2% OFFSET		PERCENT ELONGATION IN 2 in. IN 50 mm
DESIGNATION	KSI*	MPa**	KSI*	MPa**	PERCENT ELONGATION IN 2 in. IN 50 mm
Annealed (A)	35	241	10	68	55
Half Hard (1/2H)	62	427	53	365	11
Hard (H)	68	468	60	413	10
Extra Hard (XH)	70	482	62	427	10.5
Spring	72	496	63	434	11

MECHANICAL PROPERTIES ZIRCONIUM COPPER, C15000, Amzirc
For Flat Wire, Solution annealed at 1650°F (900°C) for 30 minutes, cold rolled and aged one hour
DESIGNATION	TENSILE STRENGTH		YIELD STRENGTH 2% OFFSET		PERCENT ELONGATION IN 2 in. IN 50 mm	AGING TEMP.
DESIGNATION	KSI*	MPa**	KSI*	MPa**	PERCENT ELONGATION IN 2 in. IN 50 mm	AGING TEMP.
Half Hard (1/2H)	45	310	38	262	18	795°f (425°C)
Three Quarters Hard (3/4H)	51	351	43	296	15	795°f (425°C)
Hard (H)	54	372	45	310	15	750°F (400°C)
Extra Hard (XH)	57	393	50	344	12	750°F (400°C)
Spring	60	413	52	358	12	705°F (375°C)

MECHANICAL PROPERTIES ZIRCONIUM COPPER, C15000, AmzircŽ
Retention of Room Temperature Properties after 50 hours exposure at high temperature
EXPOSURE TEMPERATURE	TENSILE STRENGTH
	BEFORE EXPOSURE		AFTER EXPOSURE
	KSI*	MPa**	KSI*	MPa**
660°F (350°C)	69	475	67	--
750°F (400°C)	67.5	465	62	--

Endurance Strength Compared with Copper
Zirconium Copper	28 KSI for 100,000,000 Cycles
Pure Copper	17 KSI for 100,000,000 Cycles

* 1 KSI equals 1,000 PSI
** 1 KSI equals 6.894,757 MPa
†† Tensile Strength and Grain Size determining factors for acceptance or rejection.
Values for reference only. Not part of specification.

ZIRCONIUM COPPER, C15000, AMZIRC

In USA:
Little Falls Alloys
171-191 Caldwell Avenue
Paterson NJ 07501

Tel: (973) 278-1666
Fax: (973) 278-7345
Toll Free: (888) LFA-Wire
(888) 532-9473
Email:info@lfa-wire.com
www.lfa-wire.com

In The UK:
William Hughes Ltd.
Station Road, Stalbridge

Dorset England DT10 2RZ
Tel +44-1963-363377
Fax +44-1963-363640
Email: sales@wmhughes.co.uk
www.wmhughes.co.uk

In California
The E. Jordan Brookes Co.
10634 Shoemaker Ave.
Santa Fe Springs CA 90670

Fax 562-968-2110
Tel 562-968-2100

Looking for quality Beryllium Copper wire, Phosphor Bronze wire and Plated wire? Little Falls Alloys offers a full service approach to the Square Wire and Zirconium Chromium Wire. We specialize in Beryllium Copper, Plated wire, Zirconium Copper Wire, Brass wire, Beryllium, Copper Alloy Wire, Copper Wire, Shaped Wire, Square Wire, Small Wire, Nickel Wire, Bronze Wire, Spring Wire, Copper Beryllium Wire.